Overview
The FUYL™ Kiosk app is available for iOS 12.0 and later, and recommended for use on iPad generations 7 - 10. The app allows both secure access and configuration of the FUYL™ Smart Locker system when set up in the FUYL™ Enhanced Portal.
Prerequisites
A Compatible iPad
The FUYL™ Kiosk app is available for iOS devices 12.0 and later. We recommend an iPad 10 for the best experience.
A FUYL™ Enhanced Organization & Admin Credentials
You or your FUYL™ Administrator will have been given access to your FUYL™ Enhanced portal. If not, please contact support for next steps.
Installation
The FUYL™ Kiosk iPad app is available in the iOS App Store here.
Configuration
iPad Configuration
Bluetooth Permissions
The FUYL™ Kiosk App will ask for permission to use bluetooth when first required. This is used to discover and communicate with nearby FUYL™ Lockers. If this is ignored or otherwise disabled;
- Open the Settings app on your iOS device.
- Scroll down and select the FUYL™ Kiosk App (e.g., “FUYL Kiosk”).
- Tap on Bluetooth.
- Ensure the switch next to Bluetooth is turned on (green).
Guided Access Mode
As the FUYL™ Kiosk iPad will likely only be used in the FUYL™ Kiosk App, you may wish to restrict end users from exiting the app, and ensure the screen stays illuminated. Guided access mode is one way to achieve this:
- Open the iPad's Settings App
- Navigate to "Accessibility" then "Guided Access"
- Tick the slider next to "Guided Access"
- Configure either a passcode or touch-ID to enable/disable (should it be required)
- Configure the display auto-lock feature
- Return to the FUYL™ Kiosk App
- Triple-press the power button
- Tap "Start"
The iPad will be "stuck" in the FUYL™ Kiosk app unless the power button is triple-pressed again and a correct passcode/touch-ID is entered.
The LocknCharge FUYL™ Kiosk Mounting Kit prevents access to the power button, which prevents Guided Access Mode from being disabled.
Single App/Kiosk Mode
You may wish to further limit your FUYL™ Kiosk iPad to only the FUYL™ Kiosk app. This can be achieved with iOS Single App Mode, which must be configured in your MDM.
FUYL™ Kiosk App
Once installed, sign in with your FUYL™ Enhanced Admin Profile's credentials.
If your account belongs to multiple organizations, you may be asked to select the organization to which this FUYL™ Kiosk will belong.
Once signed in, you may be presented with a "No workflow detected" message. This is normal, and suggests the FUYL™ Kiosk has yet to be paired with a FUYL™ Smart Locker, or that the locker it is paired to has not been fully configured.
Next Steps
If your FUYL™ Smart Locker is also ready for configuration, follow the Set Up Guide here.