Skip to main content

none

Support

Set Up a Charging Workflow

Updated

The FUYL Locker offers a secure, self-service charging solution for devices. Your locker operates in two modes: Managed and Public, each offering a simple way for users to securely charge their devices.

Select a Mode of operation

The FUYL Locker has two modes of operation:

  1. Managed Mode: In Managed Mode, users need to enter a predefined PIN code or RFID value to access the locker. This mode provides controlled access, ensuring only authorised users can charge their devices.
  2. Public Mode: Public Mode allows users to set their own PIN code every time they use the locker. This mode offers flexibility, allowing users to personalise their access code for each charging session.

To select the mode of operation, follow these steps:

  1. Log in to the FUYL Portal
  2. Select the locker to manage from the Connected Stations list
  3. In the account panel on the right, find and select the Settings tab.
  4. Within the Settings tab, you'll find the option to toggle between Managed and Public modes. Select the desired mode based on your preference.

Charge your device at a locker

To use the locker to charge a device, follow these steps:

  1. Select an available bay (green LED) by entering the bay number on the keypad 
  2. Enter user credentials 
    1. Managed Mode: Enter the PIN code or tap an RFID card associated with their user credentials in the User Directory
    2. Public Mode: Select a 4-12 digit PIN code or tap any RFID card. Pin numbers can’t be sequential (1234) or repetitive (1111)
  3. The bay door will open (LED turns from green to red).
  4. Insert the device you would like to securely store and charge into the open bay and connect the charging cable.
  5. Push the door closed to lock and secure your device (LED turns white)
  6. The bay will remain reserved until the device is collected 

 

To collect a device that is charging in a locker, follow these steps:

  1. Access the bay you reserved earlier by entering the bay number on the keypad 
  2. Enter user credentials 
    1. Managed Mode: The user must enter the PIN code or tap an RFID card associated with their user credentials in the User Directory
    2. Public Mode: The user must enter the 4-12 digit PIN code or tap any RFID card they used to reserve the bay earlier.
  3. The bay door will open (LED turns from white to red)
  4. The user must retrieve the device and other items from the open bay.
  5. Push the door closed to lock (LED turns green)

Additional Features:

In addition to mode selection, the FUYL Locker offers advanced features to further customise your charging workflow such as curfews and one reservation limits.

Related articles